Tag Archives: production process

What is Lamination Process in PCB Fabrication?

PCBs are called “laminated sandwiches” simply because they comprise multiple layers bonded together with high temperatures and pressure. It is an accurate definition of “lamination” and also a vital step of PCB fabrication. If you want to advance in your knowledge of printed circuit board fabrication – manage this post to the end. Let’s deepen […]

What is the Standard PCB Thickness?

When it comes to PCB manufacturing, choosing the correct PCB thickness is essential as your components will be inserted into multiple electronic devices. These may not be compatible with custom PCBs from heterogenous batches. So let’s review the standard thicknesses, factors that impact this measure, and how to determine its value required correctly. WHAT IS […]

What is Solder Mask Layer in PCB Manufacturing?

Do you need your PCBs to function well? Of course, you do! That’s why you want to know more about solder masks – essential layers of PCBs. Soldering mask is a complex process that requires a complete understanding of the processes, materials, and pre and post-procedures. Without such knowledge – fabricating PCBs and any other […]

What is V Groove PCB?

The V groove PCB results after the splitting of circuit boards. This requires the cutting of the circuit board and leaving a little material to help hold these boards. The final stages involved in the production are profiling the v groove PCB and cutting them from the manufacturing panel. This is either done by routing […]

Introduction of Nickel Electroplating Process for Printed Circuit Board

1. Function And Characteristics Nickel plating is used as the substrate coating for precious metals and base metals on PCB (the abbreviation of Printed Circuit Board). It is also commonly used as a surface layer for some single-sided printed boards. For some surfaces that are heavily worn, such as switch contacts, contacts, or plug gold, using […]

Failure Caused by the PCB Printing Material

The quality of the PCB screen printing image and the film-forming state of the screen printing material are affected by the performance of the printing material. During the PCB screen printing process, the faults caused by the printing material include (1) plugging holes, (2) the reverse side of the printed board being contaminated by printing material, (3) […]

High Frequency PCB Production Process

High-frequency board refers to a special circuit board with a higher electromagnetic frequency. Generally speaking, high-frequency can be defined as a frequency above 1GHz. Its various physical properties, accuracy, and technical parameters have high requirements. They are often used in fields such as 5G communications, automobile collision avoidance systems, satellite systems, and radio systems. The […]

Rigid-Flex PCB Production Process

With the advancement of science and technology, more and more electronic products are developing in the direction of miniaturization and high precision. It is difficult for traditional PCB or FPC to meet these two requirements at the same time. Therefore, a new product form was born: Rigid-flex PCB. This kind of circuit board combines the […]